Specialty Products

SPECIALTY PRODUCTS

DINITROL VCI UNI 40 is suitable for fuel tanks, gear boxes, storage tanks and similar containers. Typical applications are also the protection of outboard-motors during the winter season.

VCI-oil burns without forming ashes and is miscible with gasoline, oil and diesel. Therefore it is not necessary to take out the DINITROL VCI UNI 0-40 when starting an engine etc.. It protects iron, steel, copper, brass, bronze and other metals.

DINITROL VCI UNI 0-40

FOR FUEL TANKS, GEAR BOXES AND SIMILAR CONTAINERS.

20 LITRE CONTAINER

DINITROL L142 protects the painted metal from UV-radiation, aggressive chemicals and atmospheric pollution, during transport and storage.

Even after one year in heavy conditions, the film is easily removable with an organic degreaser. DINITROL L142 does not affect other details commonly used on cars, such as rubber, plastics and aluminium.

DINITROL L142 has low aromatic content. The product dries in minutes, easily withstanding rain or water splashing. DINITROL L142 is designed for protection of newly painted cars or other similar painted surfaces. DINITROL L142 can also be used on areas in need of temporary corrosion protection.

DINITROL L142

PAINT PROTECTION Protects Exterior of Vehicle In Transit or Storage

20 LITRE DRUM

208 LITRE DRUM

DINITROL RUSTOFF is an isoparaffinic solvent based penetrating rust-removal and release agent, permeating thick rust layers and creeping into every crevice and corner.

DINITROL RUSTOFF can be used on moist surfaces and will also dissolve tar, pitch, protective undercoating compound etc., leaving a thin rust preventive oil film, containing lubricants and colloidal graphite.

DINITROL RUSTOFF is an efficient agent for quick release of rusted items exhibiting a high level of efficacy and penetration.

DINITROL RUSTOFF

QUICK RELEASE FOR RUSTED ITEMS

500ML SPRAY CAN

DINITROL WIREGREASE is primarily intended for corrosion protection in situations where the protective film is required not only for corrosion protection, but also where it is required to act as a lubricant.

DINITROL WIREGREASE is suitable for the protection of machinery components which require ample lubrication and good corrosion protection under varying weather conditions eg. on vessels.

DINITROL WIREGREASE is particularly suitable for lubricating wires and also for the corrosion protection of iron and steel items in storage or in transit under conditions conducive to corrosion. When treating a corroded wire, a pre-treatment with DINITROL ML should be made to increase the penetration of DINITROL WIREGREASE into the wire core.

DINITROL WIREGREASE

LUBRICANT WITH ANTI-CORROSION PROTECTION

20 LITRE CONTAINER

DINITROL RC 900 is a Rust Converter with an organic chelat complex base and epoxy resin. Dinitrol RC 900 actively converts rust on substrates into a stable organic ion complex. Once the product is dry, an impermeable barrier against further corrosion is formed. DINITROL RC 900 penetrates rust 7 Р10 times deeper than standard rust converters. DINITROL RC 900 forms a dry and strong adhesive film which is suitable as a base for paintwork and other corrosion protection products.

DINITROL RC 900

RUST CONVERTER WITH EPOXY RESIN

400ML SPRAY CAN